High quality MBR membrane sheet bioreactor 20 square meters for sewage treatment plant
The modified PVDF material, which is adopted to the product, has good permeable rate, good mechanical performance, good chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Technology Features
★ Simple ——Easy to clean
★ Efficient——High efficiency / Low maintenance
★ Features ——Membrane modules are back flushable
★ Effectiveness——Yield 60-80% less sludge than conventional system
★ Compact ——Compact design – footprint 75% smaller than conventional
★ Recycle and Re-use——Possibility of direct and indirect water reuse
Model and Parameters
MBR model | SH-MBR-M010 | SH-MBR-M015 | SH-MBR-M018 | SH-MBR-M020 | SH-MBR-M030 |
Membrane area | 10 | 15 | 18 | 20 | 30 |
Size(LxWxH) | 1.0x0.53x0.05m | 1.25x1x0.04m | 1.25x1.30x0.04m | 2.0x0.53x0.05m | 1.25x2x0.04m |
PH range | 2-12 | ||||
Membrane flux | ≥1500LMH | ||||
Inner/Extemal diameter | 1.0/2.4mm | ||||
Water produced turbidity | Turbidity<0.3NTU,SS≈0,SDI<4 | ||||
Strength | ≥200N | ||||
Filter type | Submerged suction filtration | ||||
The above technical parameters are based on specific product specifications , support customization. |
Water Quality Standard
Input Water and Treated water Quality(Typical Domestic Sewage as an Example)
Project | pH | COD (mg/L) | BOD5 (mg/L) | NH3-N (mg/L) | Color Measure (degree) | SS (mg/L) | TP (mg/L) |
Input water quality |
6~9
| 200~400 | ~200 | ~30 | ~80 | ~200 | ~3 |
Treated water quality | 6~9 | ≤ 25 | ≤ 5 | ≤ 8(15) | ≤ 10 | ≤ 5 | ~0.5 |
Remark: The quality of effluent is stable to the grade A standard of "pollutant discharge standard of urban sewage treatment plant" (GB18918-2002).
Quality Guarantee
We have types of sample machines for testing hollow fiber membrane in our Technology and Research Center. Also we have performance test machine & equipment such as scanning electron microscope, aperture tester, electronic tension machine, infrared oil meter, Hash wa ter quality analyzer and so on to be used for R&D. Meanwhile we installed container type pressure components and immersed equipment to do test of membrane modules.