Alle kategorieë
EN

bedryfsnuus

home>Nuus>bedryfsnuus

Sommige misverstande oor die MBR-proses

Tyd: 2020-07-06 Hits: 112

Verstaan ​​u regtig MBR-tegnologie? Is u vertroud met hoe u dit kan gebruik?

In onlangse jare word die MBR-proses wyd deur mense gebruik. Die MBR-proses kan in baie toepassings gebruik word, soos hergebruik van teruggewonne water, verbetering van omgewingstandaarde en verspreiding van afvalwater. Soos ons almal weet, is die rede waarom die MBR-proses soveel gebruik het, hoofsaaklik te wyte aan die uitstaande voordele soos hoë vrag, lang modderouderdom, hoë afskakelingsdoeltreffendheid en klein voetspoor.

 

Although people have a deeper understanding of the MBR process, there are often some misunderstandings in the application process. These misunderstandings will cause adverse effects on people's use of the MBR process.

 

This article will introduce you to the misunderstandings that often occur in the application of MBR process in sewage treatment.

 

Misunderstanding 1: The higher the flux design of the MBR membrane, the better.

 

Correct interpretation: The flux of the membrane is determined by the material and structure of the membrane. For a particular membrane processing unit, there is an upper limit on its porosity and flux. Filtration is essentially a physical process. Membrane materials must sacrifice throughput while reducing pore size. In addition, the use of membrane materials also needs to take into account its strength, long-term operation and other characteristics. All these factors lead to the flux should be a fixed value.

 

Therefore, for the application and design of membranes in wastewater treatment, it is best to refer to the recommended parameters of membrane manufacturers.



In die volgende artikel sal ons voortgaan om verskeie ander misverstande oor die MBR-proses bekend te stel.